Properties – Printronix PrintNet Enterprise User Manual

Page 44

Chapter

The Menu Bar

Properties

Select

Status

Properties

to open the Status Monitoring Properties dialog

box. The dialog box contains three tabs: Discovery, Polling, and Alert
Delivery.

NOTE:

To enable printer discovery, check the

Enable Printer Discovery

check box.

Figure 26. Status Monitoring Properties:

Discovery Tab – Print Server Discovery Sub-Tab

Discovery Tab

You can discover printers on a network in three ways:

Print Server Discovery:

This option allows you to discover all PrintNet

printers on a subnet. To enable the option, check the

Enable Print

Server Discovery

check box in the Status Monitoring Properties dialog

box (see Figure 26), then click

Apply

Response Wait (Seconds):

To specify the time delay (in seconds) PNE

waits for a printer response. By default, the value is set at 5 seconds.

Broadcast IP

Subnet Mask

, and

Return Gateway:

These settings must

match your network configuration. See your system administrator.

NOTE:

To discover unconfigured NICs, you must enter the Gateway Address
and Subnet Mask in the Return Gateway field.