Printronix PrintNet Enterprise - Manual (Page 222)

222
Chapter 6 Event To Action Mapping
Event Name Description Parameters
Security Key
Required
Label Completed
1 Event that is generated by the printer
when a label is completed. None 9
Label Rejected
1 Event that is generated by the printer
when a label is rejected. None
9
Label Canceled
1 Event that is generated by the printer
when a label is canceled. None
9
Label Failed Event generated by the printer when a
label failed to print. None
9
Label Present
1 Event generated by the printer when
the printer has a label printed and is
waiting for the label to be taken. None
Label Taken
1 Event generated by the printer when
the label is taken. None
Page Printed
2 Event is generated by the printer
when a page is printed. None
Labels Pending,
None Event is generated by the printer
when the printer has no more pending
labels to be printed. None
9
End Paper Move Event generated by the printer when
the printer ends moving the printer. None
Cutter Cycled Event generated by the printer when
the cutter cycle is completed. None
Sensor Event Event generated by the printer when
the action to set the sensor to ignored
on or off, either is executed or failed. Sensor Type,
Event Type 9
Errors/Warnings
Printer Error Events generated by the printer when
errors occur or are cleared. Paper Jam, Paper
Out/Empty, Ribbon
out, Print Head
Open, TOF Detect
Fault, RFID Tag
Failed, RFID Max
Retry, Platen
Open, Ribbon
Stall, Stacker Fault,
Stacker Full
Printer Warning
1 Events generated by the printer when
warnings occur or are cleared. Any
Ribbon Low
Table 9: Events And Parameters