Printronix PrintNet Enterprise User Manual
Page 192
192
Chapter
5
Status Response Definition
Figure 173. Adding Conditions
8.
Click
Add
to add the entry to the list of protocol conditions. See
9.
Name this protocol that is comprised of the two conditions.
In the Name field (bottom half of window), type print_complete.
10. Select the interface to use for the status response.
Click the Interface down arrow, and select
Active
.
NOTE:
The interface selected does not have to be the same interface the
host is using for a status request. The available interfaces are Active,
Serial, Parallel, and Network.
Figure 174. Adding Protocols
11. Click
Add
to add it to the list of protocols. See Figure 174.
12. Click
OK
to return to the CST manager.
NOTE:
For the status reporting to work, the printer will have to be online.
Offline conditions, like all error situations, cannot be transmitted to the
host.
Now you will enter the input string that will trigger the protocol you just
created.
13. Click the
Mode
down arrow, and select
Response
.
14. In the Input field, press the down arrow key and type 05 (ENQ).