Printronix PrintNet Enterprise - Manual (Page 227)

Events
227
Figure 195. Setting Event Parameters
To select the Printer Error event, click the Event drop-down menu and
select Printer Error as the event parameter. The Set Event Parameters
dialog box opens. Click the Any box to uncheck the setting. A list of errors
(or warnings) is now available for selection. From the Error drop-down
menu, select the required parameter.
The Set state identifies the event when the problem happens. The
Cleared state specifies the event when the problem is solved.
TOF Detect Fault happens if the T5000 does not find a Top of Form
indicator (or a gap) within a specified amount of time after printing starts.
It can be used to prevent the feeding of blank labels in print and apply
applications.
• Panel Key
This is an event in which the operator panel keys are parameters. The
event allows you to change the function of the keys or to disable selective
keys. For example, if the panel key event Menu results in the action
Consume (or do nothing) the menu key has been disabled.
NOTE: When the advanced GPIO features are enabled in the printer, this
allows an event to be generated when multiple keys are pressed
simultaneously. Many additional key combinations can be used to
trigger an action.