Printronix PrintNet Enterprise - Manual (Page 185)

Pattern Recognition Example
185
Figure 164. Hex Entry Mode
39. Type 1B. To enter the hex equivalent of . See Figure 164.
Figure 165. Mnemonics Entry Mode
40. Right-click the Input window and select View Mnemonics . To enter the
Mnemonics entry mode. Notice the 1B changed to . See
Figure 165.
41. Type D0123,0450,0600.
42. Right-click the Input window and select View Hex .
43. Click just to the right of 0010 on the second line.
Figure 166. Hex Equivalents of LF and NUL
44. Type 0A00. To enter the hex equivalent of LF and NUL. See Figure 166.
45. Right-click the Input window and select View Mnemonics .
46. Click Run to test the CST against your input.
Figure 167. Successful CST Test Results
The length and width information have successfully been placed in the correct
position in the PGL command. See Figure 167.
NOTE: If a value outside the specified range (in this case, outside the range
0..9) is entered, no conversion takes place and the input string is
passed on to the printer unmodified.