Printronix PrintNet Enterprise - Manual (Page 285)

Report Generation
285
Data Capture file name, all telemetry data is reset for the new file. Any
existing telemetry data remains saved in the old Data Capture file name.
Figure 248. Data Capture File Properties Dialog Box
If you change the Data Capture file name to a name that already exists, the
telemetry data stored in the existing file will not be erased. All new telemetry
data will be appended to the existing file.
NOTE: You cannot change the Data Capture file name while telemetry data
is being captured.
The AutoID Data Manager never erases the Data Capture file. To delete a
Data Capture file, locate and delete the file from the default location, program
installation directory, or where it was created (it has a
.dm extension).
Report Generation
To export telemetry data to an ASCII file in either CSV or XML format, select a
printer or group of printers and then select one of the report generation
options (see “Reports” on page 283).
After the report is created, a dialog box appears giving the status, location,
and name of the report. See Figure 249. Write down this information for future
reference. Click
OK to close the dialog box.
Figure 249. Report Creation Completed Dialog Box
Report
Name
Report
Location