Printronix PrintNet Enterprise User Manual
Page 160
160
Chapter
5
CST Manager
9.
In PNE, select
Applications
Operator Panel
.
10. Take the printer offline.
11. Select
PRINTER CONTROL
Applic. Adapter
if you have a thermal
printer, or select
MAINT / MISC
Applic. Adapter
if you have a line
matrix printer.
12. Change the setting from
Disable
to the name of the CST you downloaded
(such as
CST-1
,
CST-2
, etc.). Your CST is now enabled.
NOTE:
To maximize the performance of a CST, you need to save it in a
Configuration file. See “Configuration Editor” on page 71.
Validate Bundle
Checks CSTs for syntax errors and missing information such as “Start Flush”
commands that have no corresponding “End Flush” command. Errors display
in red. Warnings display in yellow.
You cannot execute CSTs with errors, but you can execute CSTs with
warnings.
Options
Specifies options that apply to the CST. Includes the following check boxes:
•
Use Last Selected Upload Printer
•
Use Last Selected Download Printer