Printronix PrintNet Enterprise User Manual

Page 49

The Status Menu

Enable:

To select whether or not you want to enable polling of a specific task.

If you want PNE to poll the printers according to the specifications of your first
task, select

true

. Otherwise, select

false

Initial Delay (S):

To specify the time delay from when PNE starts to when

PNE polls printers. The time delay is calculated in seconds.

Polled Interval (S):

To poll printers automatically with timed intervals

calculated in seconds. Use this option to periodically poll for new printers
every few seconds.

Response Wait (MS):

To specify the time delay PNE waits between SNMP

responses. By default, the value is set at 300 milliseconds (.3 seconds).

NOTE:

If your network is overloaded and the responses are slow, you may
not receive a response with the default setting. In this case, increase
your Response Wait (MS) value.

NOTE:

If you enter a low value for slow networks, you may receive no
response. In this case, increase the Response Wait (MS) value.