Printronix PrintNet Enterprise - Manual (Page 219)

The Toolbar And Menus
219
Event To Action Mapping
Figure 191. Event To Action Mapping
Setting the criteria for mapping tables takes place in the Event to Action
Mapping section (see Figure 191). The Description field allows you can enter
a descriptive name to indicate the use of the event and its related action.
NOTE: The window header indicates which printer type (thermal or line
matrix) the mapping table is created for. Figure 191 indicates a
Thermal printer.
The Event and Action drop down menus allow you to select an event and
apply an action to the selected event. Table 9 on page 220 lists the events
currently available in the software.
The Event Parameters button allows you to select additional conditions
related to the event (Figure 192).
Figure 192. Setting Event Parameters
The Action drop down menu allows you to select the action that is to be taken
on the specified event. Table 10 on page 229 lists the actions currently
available in the software.
The Action Parameter button allows you to select additional conditions related
to the action. Figure 193 displays parameters for the Output Opto-coupler and
Output Relay actions.