ZyXEL Communications Version 1.03 - Manual (Page 71)

Chapter 5 View
NetAtlas Workgroup User’s Guide
71
The following table describes the labels in this screen.
5.8.3 DHCP Server Status
Follow the steps below to view the DHCP server status of a selected device.
1 Click View > IP Application Status.
2 Select a switch from the list located on the left-hand side of the screen.
3 Click the DHCP Server Status tab.
Table 25 View: IP Application Status: IP Table Status
LABEL DESCRIPTION
Device
Name
This field displays the descriptive name of a device.
Device IP This field displays the IP address of a device
Sort by Click one of the following buttons to display and arrange the data according to that
button type. The information is then displayed in the summary table below.
IP Click this button to display and arrange the data according to IP address.
VID Click this button to display and arrange the data according to VLAN group.
Port Click this button to display and arrange the data according to port number.
Index This field displays the index number.
IP Address This is the IP address of the device from which the incoming packets came.
VID This is the VLAN group to which the packet belongs.
Port This is the port from which the above IP address was learned. This field displays CPU to
indicate the IP address belongs to the switch.
Type This shows whether the IP address is dynamic (learned by the switch) or static
(belonging to the switch).
Polling The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking the Apply
button.
Close Click Close to close the screen.