1 configuring an rmon alarm, Table 104 rmon configuration, alarm config., new – ZyXEL Communications Version 1.03 User Manual
Page 197

Chapter 18 Configuration
NetAtlas Workgroup User’s Guide
197
18.4.1 Configuring an RMON Alarm
To create a new RMON alarm, click New in the Alarm Config. screen.
To change the settings of a selected RMON alarm, click Modify in the Alarm Config. screen.
Figure 143 RMON Configuration: Alarm Config.: New
The following table describes the labels in this screen.
Type
This field displays the alarm type (log, snmp-trap or log&trap).
Community
This field displays the community (or password).
Description
This field displays a description of the alarm.
Owner
This field displays the name of the application that creates this entry.
Table 103 RMON Configuration: Alarm Config. (continued)
LABEL
DESCRIPTION
Table 104 RMON Configuration, Alarm Config., New
LABEL
DESCRIPTION
Active
Select Yes to enable this alarm. Otherwise, select No.
Variable
Click Browse to select the variable whose data is sampled. The following screen
appears.
Figure 144 RMON Configuration: Alarm Config.: New: Browse
Select the type, port, and variable whose data should be sampled, and click OK.
Interval
Specify the time between data samplings.