ZyXEL Communications Version 1.03 - Manual (Page 130)

Chapter 12 Device Menu Overview
NetAtlas Workgroup User’s Guide
130
The following table describes this screen.
6 Click OK to display the following screen.
Figure 88 Copy Successful
7 Click Done to close the screen.
Table 54 Copy Port Setup
LABEL DESCRIPTION
Device List Select a device to which you want to copy from the switch you are currently
configuring.
Port List Panel Select one port or multiple ports (by pressing the [CTRL] key and clicking at the
same time) from the Port List Panel.
Add Click Add to display the port(s) to which you want to copy from the switch you
are currently configuring.
Remove Click Remove to move a selected port(s) from the Copy Port List Panel list to
the Port List Panel.
Copy Port List Panel This panel displays the device port(s) to which you want to copy from the switch
you are currently configuring.
OK Click OK to copy the configuration from the current switch to the device port(s)
displayed in the Copy Port List Panel.
Cancel Click Cancel to return to the previous screen.