ZyXEL Communications Version 1.03 - Manual (Page 108)

Chapter 10 Maintenance
NetAtlas Workgroup User’s Guide
108
Figure 66 Maintenance: Firmware Upgrade
5 After the file transfer is complete, a screen displays showing the result. Click Done to
close the screen. When the firmware upgrade process is complete, the switch(es)
automatically restarts (the SYS LED blinks).
Figure 67 Maintenance: Firmware Upgrade: Result
6 Wait until the switch(es) has finished rebooting before accessing it again. Check the
firmware version on the switch to make sure that the firmware is updated successfully.
10.2 Device Reset
Use the Reboot System screen to restart a switch without physically turning the power off.
1 Click Maintenance > Device Reset.
2 Select a device from the list and click Apply.