ZyXEL Communications Version 1.03 - Manual (Page 188)

Chapter 17 Multicast Configuration
NetAtlas Workgroup User’s Guide
188
17.3.5 Creating a New MVR Group
Follow the steps below to create a new MVR group.
1 In the MVR screen, select one entry in the MVLAN list table.
2 Click Add under MVR Group.
Figure 135 Multicast Configuration: MVR: Select MVLAN
3 A screen displays as shown. The Multicast VLAN ID field displays the VLAN ID to
which this MVR group setting applies. In the Name field, enter a descriptive name for
identification purposes.
Figure 136 Multicast Configuration: MVR: Add
4 In the Start Address field, enter the starting IP multicast address of the multicast group
in dotted decimal notation.
5 In the End Address field, enter the ending IP multicast address of the multicast group in
dotted decimal notation.
Enter the same IP address as the Start Address field if you want to configure only one
IP address for a multicast group.