ZyXEL Communications Version 1.03 - Manual (Page 120)

Chapter 11 Tools
NetAtlas Workgroup User’s Guide
120
Figure 78 Tool: Telnet
4 Refer to the switch User’s Guide for information on the commands used in this screen.
11.1.2 Web Access
Configure the switch using the web configurator as shown.
1 Select a switch from the list of devices shown in the Device List Panel.
2 Click Tool > Web Access to open the switch web configurator password screen. From
here you can log in directly to the switch.
3 Type the switch User name and Password to access the web configurator.
Figure 79 Tool: Web Access
4 Refer to the switch User’s Guide for information on the web configurator main screen.
11.2 Ping
Ping the host to see if the links and TCP/IP protocol on both your computer and the switch is
working. Follow the steps below:
1 Select a switch from the list of devices shown in the Device List Panel.
2 Click Tool > Ping to have the computer ping the IP address of the selected device.
3 The Command Prompt window automatically closes after the computer pings the
selected switch three times.