Configuration, 1 rmon overview, 2 history config – ZyXEL Communications Version 1.03 User Manual
Page 191: Chapter 18 configuration, 1 rmon overview 18.2 history config, Table 98 supported rmon groups, Configuration (191)

NetAtlas Workgroup User’s Guide
191
C
H A P T E R
18
Configuration
Use this menu item to look at and configure RMON (Remote Network Monitor) on a switch.
18.1 RMON Overview
Similar to SNMP, RMON (Remote Network Monitor) allows you to gather and monitor
network traffic.
Both SNMP and RMON use an agent, known as a probe, which are software processes
running on network devices to collect information about network traffic and store it in a local
MIB (Management Information Base). With SNMP, a network manager has to constantly poll
the agent to obtain MIB information. With RMON, the probe is located on a remote device
(the MSC), so a network manager (the EMS) does not need to constantly poll the probe for
information. The probe communicates with the network manager via SNMP.
RMON groups contain detailed information about specific activities. The following table
describes the four RMON groups that your IES supports.
18.2 History Config
Use this screen to view and configure RMON history configuration settings. To open this
screen, right-click on the switch in the Device List Panel, and click Configuration > RMON
Configuration > History Config. Then, select the switch that you want to configure.
Table 98 Supported RMON Groups
GROUP
DESCRIPTION
History
Records network traffic information on a specified Ethernet port.
Alarm
Provides alerts when configured alarm conditions are met.
Event
Defines event generation and resulting actions to be taken based on an alarm.