ZyXEL Communications Version 1.03 - Manual (Page 139)

Chapter 13 System Configuration
NetAtlas Workgroup User’s Guide
139
2 Specify which configuration the switch is to use after a reboot. Select Config 1 or
Config 2.
3 Click Apply to save the setting.
Figure 96 System Configuration: Boot Config
4 When the setting is successful, a result screen displays. Click Done.
Figure 97 System Configuration: Boot Config
5 Reboot the switch to have it use the selected configuration file.
13.8 IP Setup
Use the IP Setup screen to configure the default gateway device, the default domain name
server and add IP domains.
To open this screen, right-click on the switch in the Device List Panel, and click
Configuration > System Configuration > IP Setup.