beautypg.com

3 configuring dhcp relay, Figure 152 ip configuration: dhcp: server: new, Table 113 ip configuration: dhcp: server: new – ZyXEL Communications Version 1.03 User Manual

Page 206

background image

Chapter 19 IP Configuration

NetAtlas Workgroup User’s Guide

206

Figure 152 IP Configuration: DHCP: Server: New

The following table describes the labels in this screen.

19.5.3 Configuring DHCP Relay

Configure DHCP relay on the switch if the DHCP clients and the DHCP server are not in the
same subnet. During the initial IP address leasing, the switch helps to relay network
information (such as the IP address and subnet mask) between a DHCP client and a DHCP
server. Once the DHCP client obtains an IP address and can connect to the network, network
information renewal is done between the DHCP client and the DHCP server without the help
of the switch.

Table 113 IP Configuration: DHCP: Server: New

LABEL

DESCRIPTION

VID

Enter the ID number of the VLAN group to which this DHCP settings apply.

Client IP Pool

Starting

Specify the first of the contiguous addresses in the IP address pool.

Size of Client

IP Pool

Specify the size, or count of the IP address pool.

IP Subnet

Mask

Enter the subnet mask of the DHCP server.

Default

Gateway

Enter the IP address of the default gateway device.

Primary/

Secondary

DNS Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to the

DHCP clients along with the IP address and the subnet mask.

Apply

Click Apply to save the changes and close this screen.

Cancel

Click Cancel to discard all changes and close this screen.