ZyXEL Communications Version 1.03 - Manual (Page 196)

Chapter 18 Configuration
NetAtlas Workgroup User’s Guide
196
Figure 142 RMON Configuration: Alarm Config.
The following table describes the labels in this screen.
Table 103 RMON Configuration: Alarm Config.
LABEL DESCRIPTION
Index This field displays the alarm configuration index number.
Active This field displays Yes if an alarm configuration is enabled. Otherwise, it displays
No.
Interval (sec) This field displays the time interval (in seconds) between data samplings.
Sample Type This field displays the method of obtaining the sample value (Absolute or Delta).
Startup Alarm This field displays the alarm type (Rising, Falling, R/F) that can be sent when this
alarm is first activated.
Port This field displays the port number.
Variable This field displays the name of the MIB field whose data is to be sampled.
Owner This field displays the name of the application that creates this entry.
New Click this to add a new history configuration.
Delete Click this to remove the selected history configuration.
Modify Click this to change the setting of the selected history configuration.
Show Log Click this to view logs.
RMON Alarm
Parameters
Item This field indicates the type of alarm.
Threshold This field displays the threshold setting for the type of alarm. The meaning depends
on the type of alarm.
Index This field displays the event index number.
Active This field display whether an alarm is enabled (Yes) or not (No).