beautypg.com

Figure 29 vpn wizard: ipsec setting, Table 18 vpn wizard: ipsec setting – ZyXEL Communications ZyWALL 2 Plus User Manual

Page 84

background image

Chapter 3 Wizard Setup

ZyWALL 2 Plus User’s Guide

84

Figure 29 VPN Wizard: IPSec Setting

The following table describes the labels in this screen.

Table 18 VPN Wizard: IPSec Setting

LABEL

DESCRIPTION

Encapsulation Mode Tunnel is compatible with NAT, Transport is not.

Tunnel mode encapsulates the entire IP packet to transmit it securely. A Tunnel

mode is required for gateway services to provide access to internal systems.

Tunnel mode is fundamentally an IP tunnel with authentication and encryption.

Transport mode is used to protect upper layer protocols and only affects the

data in the IP packet. In Transport mode, the IP packet contains the security

protocol (AH or ESP) located after the original IP header and options, but before

any upper layer protocols contained in the packet (such as TCP and UDP).

IPSec Protocol

Select the security protocols used for an SA.
Both AH and ESP increase ZyWALL processing requirements and

communications latency (delay).

Encryption Algorithm When DES is used for data communications, both sender and receiver must

know the same secret key, which can be used to encrypt and decrypt the

message or to generate and verify a message authentication code. The DES

encryption algorithm uses a 56-bit key. Triple DES (3DES) is a variation on DES

that uses a 168-bit key. As a result, 3DES is more secure than DES. It also

requires more processing power, resulting in increased latency and decreased

throughput. This implementation of AES uses a 128-bit key. AES is faster than

3DES. Select NULL to set up a tunnel without encryption. When you select

NULL, you do not enter an encryption key.

Authentication

Algorithm

MD5 (Message Digest 5) and SHA1 (Secure Hash Algorithm) are hash

algorithms used to authenticate packet data. The SHA1 algorithm is generally

considered stronger than MD5, but is slower. Select MD5 for minimal security

and SHA-1 for maximum security.

SA Life Time

(Seconds)

Define the length of time before an IKE SA automatically renegotiates in this

field. The minimum value is 180 seconds.
A short SA Life Time increases security by forcing the two VPN gateways to

update the encryption and authentication keys. However, every time the VPN

tunnel renegotiates, all users accessing remote resources are temporarily

disconnected.