ZyXEL Communications ZyWALL 2 Plus - Manual (Page 174)

Chapter 9 DMZ Screens
ZyWALL 2 Plus User’s Guide
174
9.3 DMZ Static DHCP
This table allows you to assign IP addresses on the DMZ to specific individual computers
based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyWALL’s static DHCP settings on the DMZ, click NETWORK > DMZ >
Static DHCP. The screen appears as shown.
Figure 112 NETWORK > DMZ > Static DHCP