beautypg.com

Figure 441 macintosh os x: network, Linux – ZyXEL Communications ZyWALL 2 Plus User Manual

Page 632

background image

Appendix A Setting up Your Computer’s IP Address

ZyWALL 2 Plus User’s Guide

632

Figure 441 Macintosh OS X: Network

4 For statically assigned settings, do the following:

• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyWALL in the Router address box.

5 Click Apply Now and close the window.
6 Turn on your ZyWALL and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.

See also other documents in the category ZyXEL Communications Hardware: