ZyXEL Communications ZyWALL 2 Plus - Manual (Page 464)

Chapter 26 Maintenance
ZyWALL 2 Plus User’s Guide
464
Day for Diagnostics Use the drop down list box to select which day of the week to generate and
send diagnostic files.
Time for Diagnostics Enter the time of day in 24-hour format (for example 23:00 equals 11:00 pm)
to generate and send diagnostic files.
Display on Console Select this option to have the ZyWALL send diagnostic information through
the console port. To receive the information through the console port, you
still need to configure the mail settings and open a terminal emulation
program on the computer connected to the console port.
To handle the size of the diagnostic file, change your console port speed to
115200 bps (on both the ZyWALL and your terminal emulation program) and
enlarge the console text buffer.
Send Diagnostic Report
by E-mail
Mail Server Enter the server name or the IP address of the mail server for the e-mail
address specified in the Mail Sender field. If this field is left blank, diagnostic
files will not be sent via e-mail.
Mail Subject Type a title that you want to be in the subject line of the diagnostic e-mail
message that the ZyWALL sends.
Mail Sender Enter the e-mail address that you want to be in the from/sender line of the
diagnostic e-mail message that the ZyWALL sends. If you activate SMTP
authentication, the e-mail address must be able to be authenticated by the
mail server as well.
Send Log to Diagnostic files are sent to the e-mail address specified in this field. If this
field is left blank, diagnostic files will not be sent via e-mail.
SMTP Authentication SMTP (Simple Mail Transfer Protocol) is the message-exchange standard
for the Internet. SMTP enables you to move messages from one e-mail
server to another.
Select the check box to activate SMTP authentication. If mail server
authentication is needed but this feature is disabled, you will not receive the
diagnostic files.
User Name Enter the user name (up to 31 characters) (usually the user name of a mail
account you specified in the Mail Sender field).
Password Enter the password associated with the user name above.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 168 MAINTENANCE > Diagnostics (continued)
LABEL DESCRIPTION