ZyXEL Communications ZyWALL 2 Plus - Manual (Page 475)

ZyWALL 2 Plus User’s Guide
475
C
H A P T E R
28
SMT Menu 1 - General Setup
Menu 1 - General Setup contains administrative and system-related information.
28.1 Introduction to General Setup
Menu 1 - General Setup contains administrative and system-related information.
28.2 Configuring General Setup
1 Enter 1 in the main menu to open Menu 1 - General Setup.
2 The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.
Figure 303 Menu 1: General Setup (Router Mode)
The following table describes the fields in this menu.
Menu 1 - General Setup
System Name=
Domain Name=
Device Mode= Router Mode
Edit Dynamic DNS= No
Press ENTER to Confirm or ESC to Cancel:
Table 172 Menu 1: General Setup (Router Mode)
FIELD DESCRIPTION
System Name Choose a descriptive name for identification purposes. It is recommended you enter
your computer’s “Computer name” in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP. You can go to menu 24.8 and type "sys
domain name" to see the current domain name used by your router.
The domain name entered by you is given priority over the ISP assigned domain
name. If you want to clear this field just press [SPACE BAR] and then [ENTER].