ZyXEL Communications ZyWALL 2 Plus - Manual (Page 169)

Chapter 8 WAN Screens
ZyWALL 2 Plus User’s Guide
169
8.11.3 Response Strings
The response strings tell the ZyWALL the tags, or labels, immediately preceding the various
call parameters sent from the WAN device. The response strings have not been standardized;
please consult the documentation of your WAN device to find the correct tags.
8.12 Configuring Advanced Modem Setup
Click the Edit button in the Dial Backup screen to display the Advanced Setup screen.
"
Consult the manual of your WAN device connected to your dial backup port for
specific AT commands.
Figure 110 NETWORK > WAN > Dial Backup > Edit
The following table describes the labels in this screen.
Table 37 NETWORK > WAN > Dial Backup > Edit
LABEL DESCRIPTION
AT Command
Strings
Dial Type the AT Command string to make a call.
Drop Type the AT Command string to drop a call. "~" represents a one second wait, for
example, "~~~+++~~ath" can be used if your modem has a slow response time.
Answer Type the AT Command string to answer a call.