3 tcp/ip setup, 1 ip address – ZyXEL Communications ZyWALL 2 Plus User Manual
Page 502
Chapter 32 DMZ Setup
ZyWALL 2 Plus User’s Guide
502
32.3 TCP/IP Setup
For more detailed information about RIP setup, IP multicast and IP alias, please refer to
.
32.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
Figure 325 Menu 5: DMZ Setup
From menu 5, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays
Menu 5.2 -
TCP/IP and DHCP Ethernet Setup,
as shown next.
Figure 326 Menu 5.2: TCP/IP and DHCP Ethernet Setup
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to
for information on how to configure these fields.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None TCP/IP Setup:
Client IP Pool:
Starting Address= N/A IP Address= 10.2.3.4
Size of Client IP Pool= N/A IP Subnet Mask= 255.0.0.0
Primary DNS Server= N/A RIP Direction= Both
IP Address= N/A Version= RIP-1
Secondary DNS Server= N/A Multicast= None
IP Address= N/A Edit IP Alias= No
Third DNS Server= N/A
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel: