ZyXEL Communications ZyWALL 2 Plus - Manual (Page 463)

Chapter 26 Maintenance
ZyWALL 2 Plus User’s Guide
463
Figure 297 MAINTENANCE > Diagnostics
The following table describes the labels in this screen.
Table 168 MAINTENANCE > Diagnostics
LABEL DESCRIPTION
Enable Diagnostics Select this option to turn on the diagnostics feature.
Perform Diagnostics
Now
Click this button to generate and send a diagnostic file immediately, instead
of based on a time period or CPU usage level.
Perform diagnostics
when CPU utilization
exceeds
Set the ZyWALL to generate and send a diagnostic file every time the CPU
usage exceeds the specified percent for more than 60 seconds. Enter 0 to
have the ZyWALL not generate and send diagnostic files based on CPU
usage going over a specific level.
Periodic Diagnostics Use these fields to set the ZyWALL to generate and send diagnostic files at
regular intervals.
Even if you enable both CPU utilization-based and periodic diagnosis, the
ZyWALL only sends one diagnostic file within five minutes (unless you click
Perform Diagnostics Now).
Diagnostics Frequency Set how often the ZyWALL generates and sends diagnostic files.
Hourly
Daily
Weekly
None.
If you select Daily or Weekly, specify a time of day for the ZyWALL to
generate and send diagnostic files. If you select Weekly, then also specify
which day of the week. Select None to have the ZyWALL not generate and
send diagnostic files based on a time period.