ZyXEL Communications ZyWALL 2 Plus - Manual (Page 116)

Chapter 4 Tutorials
ZyWALL 2 Plus User’s Guide
116
Figure 70 Tutorial Example: Bandwidth Management
The following table shows the example information you configure in the bandwidth
management screens.
4.4.2 Configuring Bandwidth Management Rules
Follow the steps below to set up bandwidth management rules for different traffic.
1 Click ADVANCED > BW MGMT.
2 Select Active to apply bandwidth management to traffic that is forwarded out through the
WAN port.
3 Enter the WAN port’s upstream speed.
4 Select Priority-Based to have the ZyWALL give preference to bandwidth classes with
higher priorities.
5 Deselect the Maximize Bandwidth Usage option to reserve bandwidth for traffic that is
not defined in a bandwidth class.
6 Click Apply.
Total Bandwidth Budget
(WAN Upstream Speed) 512 Kbps
Bandwidth for VoIP Traffic 128 Kbps
Priority for VoIP Traffic 7
Bandwidth for FTP Traffic 128 Kbps
Priority for FTP Traffic 2
Bandwidth for WWW Traffic 128 Kbps
Priority for WWW Traffic 3