ZyXEL Communications ZyWALL 2 Plus - Manual (Page 613)

ZyWALL 2 Plus User’s Guide
613
C
H A P T E R
46
Product Specifications
his chapter gives details about your ZyWALL’s hardware and firmware features.
46.1 General ZyWALL Specifications
The following tables summarize the ZyWALL’s hardware and firmware features.
Table 221 Hardware Specifications
Dimensions (W x D x H) 181(W) x 128(D) x 36(H) mm
Weight 304g
Power Specification 12 V DC 1 A
Ethernet Ports Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
Reset Button Restores factory default settings
Console RJ-45 port for RS-232 null modem connection
Dial Backup RJ-45 port for RS-232 connection
Operation Temperature 0º C ~ 50º C
Storage Temperature -30º C ~ 60º C
Operation Humidity 20% ~ 95% RH (non-condensing)
Storage Humidity 20% ~ 95% RH (non-condensing)
Distance between the
centers of the holes (for
wall mounting) on the
ZyWALL’s back.
125 mm
Recommended type of
screws for wall-mounting
M4 Tap Screw, see Figure 427 on page 618 .
Certifications EMC: FCC Class B, CE-EMC Class B, C-Tick Class B, VCCI Class B
Safety: CSA International, CE EN60950-1
Table 222 Firmware Specifications
FEATURE DESCRIPTION
Default IP Address 192.168.1.1
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
DHCP Pool 192.168.1.33 to 192.168.1.160