ZyXEL Communications ZyWALL 2 Plus - Manual (Page 123)

Chapter 4 Tutorials
ZyWALL 2 Plus User’s Guide
123
4.5.3 Assign Bob’s Computer a Specific IP Address
You will configure a content filtering policy for traffic from Bob’s computer’s IP address. Do
the following to have the ZyWALL always give Bob’s computer the same IP address
(192.168.1.33 in this example).
1 Click HOME > DHCP Table.
2 Find the entry for Bob’s computer and select the Reserve check box as shown next.
3 Click Apply.
Figure 81 HOME > DHCP Table
4.5.4 Create a Content Filter Policy for Bob
Do the following to create a content filtering policy for traffic from Bob’s computer.
1 Click SECURITY > CONTENT FILTER > Policy and then the Insert button. The
ZyWALL applies the content filter policies in order, so make sure you add the new
policy before the default policy.
Figure 82 SECURITY > CONTENT FILTER > Policy
2 Select Active.
3 Give the policy a name.
4 Configure a single address of 192.168.1.33.