ZyXEL Communications ZyWALL 2 Plus - Manual (Page 181)

ZyWALL 2 Plus User’s Guide
181
C
H A P T E R
10
Wireless LAN
This chapter discusses how to configure wireless LAN on the ZyWALL.
10.1 Wireless LAN Introduction
A wireless LAN can be as simple as two computers with wireless LAN adapters
communicating in a peer-to-peer network or as complex as a number of computers with
wireless LAN adapters communicating through access points which bridge network traffic to
the wired LAN. To add a wireless network to the ZyWALL, you can connect an Access Point
to a port in the WLAN role.
10.2 Configuring WLAN
To add wireless functionality to the ZyWALL, use the Port Roles screen (see Figure 121 on
page 188 ) to set a port to be part of the WLAN and connect an access point (AP) to the WLAN
interface.
Click NETWORK > WLAN to open the WLAN screen to configure the IP address for
ZyWALL’s WLAN interface, other TCP/IP and DHCP settings.