ZyXEL Communications ZyWALL 2 Plus - Manual (Page 458)

Chapter 26 Maintenance
ZyWALL 2 Plus User’s Guide
458
The following table describes the labels in this screen.
1
Do not turn off the ZyWALL while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyWALL again.
Figure 288 Firmware Upload In Process
The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 289 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the HOME screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Table 166 MAINTENANCE > Firmware Upload
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.