ZyXEL Communications ZyWALL 2 Plus - Manual (Page 615)

Chapter 46 Product Specifications
ZyWALL 2 Plus User’s Guide
615
46.2 Cable Pin Assignments
In a serial communications connection, generally a computer is DTE (Data Terminal
Equipment) and a modem is DCE (Data Circuit-terminating Equipment). The ZyWALL is
DCE when you connect a computer to the console port. The ZyWALL is DTE when you
connect a modem to the dial backup port.
1
The console cable and dial backup cable each have an RJ-45 connector and a DB-9 connector.
The pin layout for the DB-9 connector end of the cables is as follows.
Bandwidth Management You can efficiently manage traffic on your network by reserving
bandwidth and giving priority to certain types of traffic and/or to particular
computers.
Remote Management This allows you to decide whether a service (HTTP or FTP traffic for
example) from a computer on a network (LAN or WAN for example) can
access the ZyWALL.
Table 223 Feature and Performance Specifications
FEATURE SPECIFICATION
Local User Database Entries 32
Static DHCP Table Entries 32
Static Routes 12
Port Forwarding Rules 20
Concurrent Sessions (NAT sessions) 3000
Address Mapping Rules 10
Configurable IPSec VPN Network Policies (including network
policies in the recycle bin)
10
Simultaneous IPSec VPN Connections 5
Bandwidth Management Classes 10
Bandwidth Management Class Levels 1
DNS Address Record Entries 30
DNS Name Server Record Entries 16
Firewall Throughput 24Mbps
VPN 3DES/AES Throughput 24Mbps
User Licenses Unlimited
Table 222 Firmware Specifications
FEATURE DESCRIPTION
1. Pins 2,3 and 5 are used.