ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 63)

P-793H User’s Guide
Chapter 3 Wizards 63
3.2.1 Screen 1
Activate bandwidth management and select to allocate bandwidth to packets based on the
services.
Figure 17 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
3.2.2 Screen 2
Use the second wizard screen to select the services that you want to apply bandwidth
management, and select the priorities that you want to apply to the services listed.
Table 13 Bandwidth Management Wizard: General Information
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device’s WAN or LAN port. If
you do not select this, you cannot run the rest of the wizard.
Services Setup Select Services Setup to allocate bandwidth based on the service requirements.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.