beautypg.com

3 backup configuration, 1 backup configuration, Table 122 filename conventions – ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Page 328

background image

P-793H User’s Guide

328

Chapter 34 Firmware and Configuration File Maintenance

The following table is a summary. Please note that the internal filename refers to the filename
on the ZyXEL Device and the external filename refers to the filename not on the ZyXEL
Device, that is, on your computer, local network or FTP site and so the name (but not the
extension) may vary. After uploading new firmware, see the ZyNOS F/W Version field in
Menu 24.2.1 - System Maintenance - Information
to confirm that you have uploaded the
correct firmware version. The AT command is the command you enter after you press “y”
when prompted in the SMT menu to go into debug mode.

34.3 Backup Configuration

Note: The ZyXEL Device displays different messages explaining different ways to

backup, restore and upload files in menus 24.5, 24.6, 24. 7.1 and 24.7.2
depending on whether you use the console port or Telnet.

Option 5 from Menu 24 - System Maintenance allows you to backup the current ZyXEL
Device configuration to your computer. Backup is highly recommended once your ZyXEL
Device is functioning properly. FTP is the preferred method for backing up your current
configuration to your computer since it is faster. You can also perform backup and restore
using menu 24 through the console port. Any serial communications program should work
fine; however, you must use Xmodem protocol to perform the download/upload and you don’t
have to rename the files.

Please note that terms “download” and “upload” are relative to the computer. Download
means to transfer from the ZyXEL Device to the computer, while upload means from your
computer to the ZyXEL Device.

34.3.1 Backup Configuration

Follow the instructions as shown in the next screen.

Table 122 Filename Conventions

FILE TYPE

INTERNAL
NAME

EXTERNAL NAME

DESCRIPTION

Configuration

File

Rom-0

This is the configuration filename on the ZyXEL

Device. Uploading the rom-0 file replaces the entire

ROM file system, including your ZyXEL Device

configurations, system-related data (including the

default password), the error log and the trace log.

*.rom

Firmware

Ras

This is the generic name for the ZyNOS firmware on

the ZyXEL Device.

*.bin