ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual
Page 240
P-793H User’s Guide
240
Chapter 19 Tools
Note: Do not turn off the device while configuration file upload is in progress.
When the ZyXEL Device has finished restoring the selected configuration file, the following
screen appears.
Figure 128 Configuration Upload Successful
The device now automatically restarts. This causes a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 129 Network Temporarily Disconnected
If the ZyXEL Device’s IP address is different in the configuration file you selected, you may
need to change the IP address of your computer to be in the same subnet as that of the ZyXEL
Device. See your Quick Start Guide or the appendices for details on how to set up your
computer’s IP address.
You might have to open a new browser to log in again.
If the upload was not successful, a Configuration Upload Error screen appears.
Upload
Click this to restore the selected configuration file. See below for more information
about this.
Note: Do not turn off the device while configuration file upload is in
progress.
Reset to Factory
Default Settings
Reset
Click this to clear all user-entered configuration information and return the ZyXEL
Device to its factory defaults. There is no warning screen. See
for more information about resetting the ZyXEL Device.
Table 85 Tools > Configuration (continued)
LABEL
DESCRIPTION