ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 421)

P-793H User’s Guide
Appendix J Log Descriptions 421
Rcvd data too
large! Max size
allowed: The router received directory data that was too large (the size is listed)
from the LDAP server whose address and port are recorded in the
Source field. The maximum size of directory data that the router allows
is also recorded.
Cert trusted: name> The router has verified the path of the certificate with the listed subject
name.
Due to ,
cert not trusted:
Due to the reasons listed, the certificate with the listed subject name
has not passed the path verification. The recorded reason codes are
only approximate reasons for not trusting the certificate. Please see
Table 170 on page 421 for the corresponding descriptions of the codes.
Table 170 Certificate Path Verification Failure Reason Codes
CODE DESCRIPTION
1 Algorithm mismatch between the certificate and the search constraints.
2 Key usage mismatch between the certificate and the search constraints.
3 Certificate was not valid in the time interval.
4 (Not used)
5 Certificate is not valid.
6 Certificate signature was not verified correctly.
7 Certificate was revoked by a CRL.
8 Certificate was not added to the cache.
9 Certificate decoding failed.
10 Certificate was not found (anywhere).
11 Certificate chain looped (did not find trusted root).
12 Certificate contains critical extension that was not handled.
13 Certificate issuer was not valid (CA specific information missing).
14 (Not used)
15 CRL is too old.
16 CRL is not valid.
17 CRL signature was not verified correctly.
18 CRL was not found (anywhere).
19 CRL was not added to the cache.
20 CRL decoding failed.
21 CRL is not currently valid, but in the future.
22 CRL contains duplicate serial numbers.
23 Time interval is not continuous.
24 Time information not available.
25 Database method failed due to timeout.
Table 169 PKI Logs (continued)
LOG MESSAGE DESCRIPTION