ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 342)

P-793H User’s Guide
342 Chapter 35 Menus 24.8 to 24.11
For example,
sys filter netbios config
means that you must specify the type of netbios filter and whether to turn it on or off.
35.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.
Figure 226 Valid Commands
35.2 Call Control Support
The ZyXEL Device provides a call control function for budget management. Please note that
this menu is only applicable when Encapsulation is set to PPPoE or PPPoA in menu 4 or
menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the ZyXEL Device within certain times. When the total outgoing call time exceeds the limit,
the current call will be dropped and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System
Maintenance - Call Control, as shown in the next table.
Figure 227 Menu 24.9: System Maintenance - Call Control
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
P-793H> ?
Valid commands are:
sys exit device ether
wan poe xdsl aux
config ip ipsec ppp
bridge hdap bm lan
P-793H>
Menu 24.9 - System Maintenance - Call Control
1. Budget Management