ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 269)

P-793H User’s Guide
Chapter 26 Remote Node Setup 269
C
H A P T E R
26
Remote Node Setup
Use this menu to configure detailed remote node settings (for example, your ISP is a remote
node) as well as apply filters.
26.1 Introduction to Remote Node Setup
A remote node is required for placing calls to a remote gateway. A remote node represents
both the remote gateway and the network behind it across a WAN connection. Note that when
you use menu 4 to set up Internet access, you are actually configuring a remote node.
26.2 Remote Node Setup
From the main menu, select menu option 11 to open Menu 11 - Remote Node Setup (shown
below).
Figure 148 Menu 11: Remote Node Setup
Select the node you want to configure.
26.3 Remote Node Profile
The following explains how to configure remote nodes 1-7.
Menu 11 - Remote Node Setup
1. MyISP (ISP, SUA)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________