beautypg.com

5 lan client list, Figure 37 lan > client list, Table 26 lan > client list – ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

Page 103

background image

P-793H User’s Guide

Chapter 6 LAN Setup

103

6.5 LAN Client List

This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.

Use this screen to change your ZyXEL Device’s static DHCP settings. Click Network > LAN
> Client List. The screen appears as shown.

Figure 37 LAN > Client List

The following table describes the labels in this screen.

Table 26 LAN > Client List

LABEL

DESCRIPTION

IP Address

Enter the IP address that you want to assign to the computer on your LAN with the

MAC address specified below.
The IP address should be within the range of IP addresses you specified in the

DHCP Setup for the DHCP client.

MAC Address

Enter the MAC address of a computer on your LAN.

Add

Click Add to add a static DHCP entry.

#

This is the index number of the static IP table entry (row).

Status

This field displays whether the client is connected to the ZyXEL Device.

Host Name

This field displays the computer host name.

IP Address

This field displays the IP address relative to the # field listed above.

MAC Address

The MAC (Media Access Control) or Ethernet address on a LAN (Local Area

Network) is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address

that is assigned at the factory. This address follows an industry standard that

ensures no other adapter has a similar address.

Reserve

Select the check box(es) in each entry to have the ZyXEL Device always assign

the selected entry(ies)’s IP address(es) to the corresponding MAC address(es)

(and host name(s)). You can select up to 32 entries in this table.

Modify

Click the modify icon to have the IP address field editable and change it.

Apply

Click Apply to save your changes back to the ZyXEL Device.