1 configuring dynamic dns, Figure 137 menu 1.1: configure dynamic dns – ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual
Page 252
P-793H User’s Guide
252
Chapter 22 General Setup
22.1.1 Configuring Dynamic DNS
To configure Dynamic DNS, set the ZyXEL Device to router mode in menu 1 or in the
MAINTENANCE Device Mode screen and go to Menu 1 - General Setup and press
[SPACE BAR] to select Yes in the Edit Dynamic DNS field. Press [ENTER] to display
Menu 1.1 - Configure Dynamic DNS (shown next).
Figure 137 Menu 1.1: Configure Dynamic DNS
Route IP
Select Yes to enable IP-based routing in the ZyXEL Device. This is not effective for
a specific remote node unless you enable IP-based routing in the remote node too.
See
Menu 11.1: Remote Node Profile (nodes 1-7)
.
You should enable Route IP, Bridge, or both in this screen. If you disable Route IP
and Bridge, the device does not send traffic between the LAN ports and remote
node.
Bridge
If Route IP is Yes, select Yes in this field to enable bridging in the ZyXEL Device for
protocols that are not supported by IP-based routing (for example, SNA).
If Route IP is No, select Yes in this field to enable bridging in the ZyXEL Device for
all protocols.
In either case, this setting is not effective for a specific remote node unless you
enable bridging in the remote node too. See
Menu 11.1: Remote Node Profile
You should enable Route IP, Bridge, or both in this screen. If you disable Route IP
and Bridge, the device does not send traffic between the LAN ports and remote
node.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Table 91 Menu 1: General Setup (continued)
FIELD
DESCRIPTION
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= No
DDNSType= DynamicDNS
Host 1=
Host 2=
Host 3=
Username=
Password= ********
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
DDNS Server Auto Detect IP Address= No
Use Specified IP Address= No
Use IP Address= N/A