ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 205)

P-793H User’s Guide
Chapter 15 Remote Management Configuration 205
15.3 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next. The
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.
Figure 96 Telnet Configuration on a TCP/IP Network
15.4 Configuring Telnet
See Section 15.1 on page 203 for background information. Use this screen to configure Telnet
access to the ZyXEL Device. Click Advanced > Remote MGMT > Telnet tab to display the
screen as shown.
Figure 97 Remote MGMT > Telnet
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your settings back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 70 Remote MGMT > WWW (continued)
LABEL DESCRIPTION