ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 276)

P-793H User’s Guide
276 Chapter 26 Remote Node Setup
Figure 152 Menu 11.5: Remote Node Filter
The following table describes the labels in this menu.
26.6 Remote Node ATM Layer Options
Move the cursor to the Edit ATM Options field in menu 11.1, then press [SPACE BAR] to
select Yes. Press [ENTER]
to open this menu. This menu depends on the multiplexing and
encapsulation you select in menu 11.1.
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Table 103 Menu 11.5: Remote Node Filter
FIELD DESCRIPTION
Input Filter Sets
protocol filters Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Output Filter Sets
protocol filters Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Call Filter Sets These fields appear if you selected PPPoA or PPPoE in Encapsulation in
menu 11.1.
protocol filters Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
device filters Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).