ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 358)

P-793H User’s Guide
358 Chapter 37 Schedule Setup
The following table describes the labels in this menu.
37.3 Schedule Set Setup
This menu is only applicable if your Internet connection uses PPPoE encapsulation. Use this
menu to configure the schedule sets in the ZyXEL Device. To open this menu, enter the
number of the schedule set in the Enter Schedule Set Number to Configure field, enter the
name of the schedule set in the Edit Name field, and press [ENTER] in menu 26.
Figure 239 Menu 26.1: Schedule Set Setup
Table 131 Menu 26: Schedule Setup
FIELD DESCRIPTION
1-12 This field shows the beginning of the name of each schedule set.
Lower numbered sets take precedence over higher numbered sets. This avoids
scheduling conflicts. For example, if sets 1, 2, 3 and 4 in are applied in the
remote node, then set 1 takes precedence over set 2, 3 and 4.
Enter Schedule Set
Number to Configure
If you want to configure a schedule set, enter the number of the static route in
this field, enter the name in the Edit Name field, and press [ENTER]. Menu
26.1 appears.
If you want to delete a schedule set, enter the number of the static route in this
field, leave the name blank in the Edit Name field, and press [ENTER].
Edit Name Enter the name of the schedule set you want to configure, or leave this field
blank to delete the specified schedule set.
Menu 26.1 Schedule Set Setup
Active= Yes
Start Date(yyyy-mm-dd)= 2000 - 01 - 01
How Often= Once
Once:
Date(yyyy-mm-dd)= 2000 - 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time(hh:mm)= 00 : 00
Duration(hh:mm)= 00 : 00
Action= Forced On