ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 57)

P-793H User’s Guide
Chapter 3 Wizards 57
3.1.2 Screen 2
These screens let you enter the rest of the Internet settings, which depend on the encapsulation
your Internet connection uses (and the mode you selected, for RFC1483).
This screen appears if your Internet connection uses Ethernet encapsulation.
Figure 12 Internet Setup Wizard: ISP Parameters (Ethernet)
The following table describes the fields in this screen.
Next Click Next to continue to the next wizard screen. The next wizard screen you see
depends on what mode and encapsulation you selected above.
Exit Click Exit to close the wizard screen without saving your changes.
Table 6 Internet Setup Wizard: ISP Parameters
LABEL DESCRIPTION
Table 7 Internet Setup Wizard: ISP Parameters (Ethernet)
LABEL DESCRIPTION
Obtain an IP
Address
Automatically
Select this if you have a dynamic IP address.
Static IP
Address
Select this if you have a static (fixed) IP address, and enter the information below.
These fields appear if you select Static IP Address.
IP Address Enter the static IP address provided by your ISP.
Subnet Mask Enter the subnet mask provided by your ISP.
Gateway IP
Address
Enter the IP address of the gateway provided by your ISP. If your ISP did not provide
one, use the default value.