ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 235)

P-793H User’s Guide
Chapter 18 Logs 235
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full.
Selecting many alert and/or log categories (especially Access Control) may result in many e-
mails being sent.
Figure 122 Logs > Log Settings
The following table describes the fields in this screen.
Table 83 Logs > Log Settings
LABEL DESCRIPTION
E-mail Log
Settings
Mail Server Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
E-mail.
Mail Subject Type a title that you want to be in the subject line of the log e-mail message that the
ZyXEL Device sends. Not all ZyXEL Device models have this field.
Send Log To The ZyXEL Device sends logs to the e-mail address specified in this field. If this field
is left blank, the ZyXEL Device does not send logs via e-mail.
Send Alerts To Alerts are real-time notifications that are sent as soon as an event, such as a DoS
attack, system error, or forbidden web access attempt occurs. Enter the E-mail
address where the alert messages will be sent. Alerts include system errors, attacks
and attempted access to blocked web sites. If this field is left blank, alert messages
will not be sent via E-mail.