1 rule configuration, Table 67 bandwidth mgmt > rule setup – ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual
Page 194
P-793H User’s Guide
194
Chapter 13 Bandwidth Management
The following table describes the labels in this screen.
13.8.1 Rule Configuration
See
for background information. Use this screen to configure a
bandwidth management rule. Use bandwidth rules to allocate specific amounts of bandwidth
capacity (bandwidth budgets) to specific applications and/or subnets. To open this screen,
click the Edit icon or select User define in the Service field
Table 67 Bandwidth MGMT > Rule Setup
LABEL
DESCRIPTION
Rule Setup
Direction
Select the direction of traffic to which you want to apply bandwidth management.
Service
Select a service for your rule or you can select User define to go to the screen
where you can define your own.
Priority
Select a priority from the drop down list box. Choose High, Mid or Low.
Bandwidth
Specify the maximum bandwidth allowed for the rule in kbps. The
recommendation is a setting between 20 kbps and 20000 kbps for an individual
rule.
Add
Click this button to add a rule to the following table.
To Interface
#
This is the number of an individual bandwidth management rule.
Active
This displays whether the rule is enabled. Select this check box to have the
ZyXEL Device apply this bandwidth management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.
Rule Name
This is the name of the rule.
Destination Port
This is the port number of the destination. 0 means any destination port.
Priority
This is the priority of this rule.
Bandwidth (kbps)
This is the maximum bandwidth allowed for the rule in kbps.
Modify
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.