7 configuring dns, Figure 101 remote mgmt > dns – ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual
Page 210
P-793H User’s Guide
210
Chapter 15 Remote Management Configuration
15.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on LAN for background information.
See
for background information. Click Advanced > Remote
MGMT > DNS. The screen appears as shown. Use this screen to set from which IP address
the ZyXEL Device will accept DNS queries and on which interface it can send them your
ZyXEL Device’s DNS settings.
Figure 101 Remote MGMT > DNS
Secured Client IP
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
SNMP Configuration
Get Community
Enter the Get Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is public and allows
all requests.
Set Community
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Trap Community
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Trap Destination
Type the IP address of the station to send your SNMP traps to.
Apply
Click Apply to save your customized settings and exit this screen.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 75 Remote MGMT > SNMP (continued)
LABEL
DESCRIPTION