ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H - Manual (Page 246)

P-793H User’s Guide
246 Chapter 21 Introducing the SMT
Figure 135 SMT Main Menu
Note: There is an inactivity timeout, and the default value is ten minutes. If there is no
activity for longer than this, your ZyXEL Device will automatically log you out.
You will then have to telnet into the ZyXEL Device again. You can use the web
configurator or the CI commands (menu 24.8) to change the inactivity timeout
period.
21.2 SMT Menu Items
The following table provides an overview of each menu item.
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
P-793H Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter and Firewall Setup
2. WAN Setup 22. SNMP Configuration
3. LAN Setup 23. System Password
4. Internet Access Setup 24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup 99. Exit
Enter Menu Selection Number:
Table 88 Main Menu Summary
MENU FUNCTION
1 General Setup Use this menu to set up device mode, dynamic DNS and administrative
information.
2 WAN Setup Use this menu to configure the DSL connection, traffic redirect, and dial-
backup interface.
3 LAN Setup Use this to apply LAN filters, configure LAN DHCP and TCP/IP settings, and
to allow or block layer-2 traffic between each pair of ports.
4 Internet Access Setup Use this menu to configure your Internet connection.
11 Remote Node Setup Use this menu to configure detailed remote node settings (for example, your
ISP is a remote node) as well as apply filters.
12 Static Routing Setup Use this menu to configure IP and bridge (MAC) static routes.
15 NAT Setup Use this menu to configure Network Address Translation (NAT) on the
ZyXEL Device.