Toshiba Tohsiba Electromagnetic Flowmeter Converter L5232 - Manual (Page 92)

6F8A0917
- 91 -
Checking each setting for digital I/O
The following is an example to show how to check the function setting of Digital Output 1.
To check other setting values, select the following function numbers.
Digital Output 1 F1: DO1 FNCTN
Digital Output 2 F2: DO2 FNCTN
Digital Output 3 F3: DO3 FNCTN
Digital Output 4 F4: DO4 FNCTN
Digital Output alarm state 1 F5: DO1 ALM STS
Digital Output alarm state 2 F6: DO2 ALM STS
Digital Output alarm state 3 F7: DO3 ALM STS
Digital Output alarm state 4 F8: DO4 ALM STS
Digital Input 1 G1: DI1 FNCTN
Digital Input 2 G2: DI2 FNCTN
Digital Input control signal level 1 G3: DI1 DET LEV
Digital Input control signal level 2 G4: DI2 DET LEV
Switch operation Display example Description
F1: DO1 FNCTN
1:HIGH ALM
Select F1: DO1 FNCTN from the setting item selection menu.
The currently set function of Digital Output 1 appears.
F1: DO1 FNCTN
Returns to the menu of setting item selection.